Forte
preferred temperature. This setting should
normally be regarded as optimum shower
performance throughout the year. Temperature
adjustment at this setting is via the temperature
control.
To adjust the shower temperature
Alter the water temperature by increasing or
decreasing the flow rate of the water through the
shower via the temperature control
(fig.0)
.
After finding your preferred shower temperature,
the temperature control setting can be
remembered and left as the normal setting. This
should only need to be altered to compensate
for seasonal changes in ambient water
temperature.
Note:
The preferred setting on ECONOMy will
give a different temperature to the same setting
on HIGH.
To decrease the shower temperature
Turn the temperature control anti-clockwise
(fig.0)
; this will increase the flow of water
through the shower.
To increase the shower temperature
Turn the temperature control clockwise
(fig.)
;
this will decrease the flow of water through the
shower.
Note:
It is advisable to be certain that the
showering temperature is satisfactory by testing
with your hand before stepping under the
showerhead. There will always be a time delay of
a few seconds between selecting a flow rate and
the water reaching the stable temperature for
that flow rate.
CAUTIoN:
this appliance is not intended
for use by persons (including children)
with reduced physical, sensory or mental
capabilities, or lack of experience and
knowledge, unless they have been given
supervision or instruction concerning use of
the appliance by a person responsible for
their safety.
children should be supervised to ensure that
they do not play with the appliance.
Temperature
control to
minimum flow
position
Fig.
7HPSHUDWXUH
FRQWUROWR
PD[LPXPIORZ
Fig.0
