Purificare ©2015
19
Troubleshooting
TROUBLESHOOTING GUIDE
PROBLEM
CAUSE
CORRECTION
U.V. lamp will not light Check input voltage if below
Install a voltage regulator
or above 120 volts
Line cord disconnected
Check, replace
or outlet defective
Defective U.V. lamp
Replace
Defective lamp ballast
Check output voltage
Replace ballast
Loose open-circuit wire
Trace out and repair
Leak at quartz nipple
Defective or cracked O-Ring
Replace O-Ring
O-Ring not seated properly
Replace O-Ring
Cracked Quartz Sleeve
Replace Quartz Sleeve