4
GB
Specification
Rating:
230V~50Hz, 1500W
No load speed:
15,000/min
Planing depth:
0 - 2mm
Planing width:
180mm
Blades:
Reversible 180mm HSS steel blades, set of 3
Protection Class:
Dimensions (L x W x H):
525 x 275 x 170mm
Weight:
8.6kg
As part of our ongoing product development, specifications of
Triton products may alter without notice.
Sound pressure L
PA
:
94dB(A)
Sound power L
WA
:
105dB(A)
Uncertainty K:
3dB
Weighted vibration:
5.8m/s
2
(main handle)
7.0m/s
2
(front handle)
Uncertainty:
1.5m/s
2
(main & front handle)
The sound intensity level for the operator exceeds 85dB(A)
and sound protection measures are necessary.
V
Volts
~, a.c.
Alternating current
A, mA
Ampere, milli-Amp
n
0
No load speed
n
Rated speed
°
Degrees
Ø
Diameter
Hz
Hertz
, d.c.
Direct current
W, kW
Watt, kilowatt
/min or min
-1
Operations per minute
rpm
Revolutions per minute
dB(A)
Decibel sound level
(A weighted)
m/s
2
Metres per second squared
(vibration magnitude)
Technical Abbreviations Key
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Wear hand protection
Read instruction manual
WARNING:
Moving parts can cause crush and cut injuries
Warning:
Sharp blades or teeth!
Always disconnect from the power supply when adjusting, changing accessories,
cleaning, carrying out maintenance and when not in use!
DO NOT use in rain or damp environments!
Caution!
Dust extraction required or recommended
Class II construction (double insulated for additional protection)
Conforms to relevant legislation and safety standards.
Environmental Protection
Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist. Check with your local authority or retailer
for recycling advice.
Description of Symbols
The rating plate on your tool may show symbols. These represent important information about
the product or instructions on its use.
Thank you for purchasing this Triton tool. This manual contains information necessary for
safe and effective operation of this product. This product has unique features and,
even if you are familiar with similar products, it is necessary to read this manual carefully
to ensure you fully understand the instructions. Ensure all users of the tool read and fully
understand this manual.
Original Instructions
Introduction
WARNING
: Always wear ear protection where the sound level exceeds 85dB(A) and limit the
time of exposure if necessary. If sound levels are uncomfortable, even with ear protection, stop
using the tool immediately and check the ear protection is correctly fitted and provides the
correct level of sound attenuation for the level of sound produced by your tool.
WARNING
: User exposure to tool vibration can result in loss of sense of touch, numbness,
tingling and reduced ability to grip. Long-term exposure can lead to a chronic condition. If
necessary, limit the length of time exposed to vibration and use anti-vibration gloves. Do not
operate the tool with hands below a normal comfortable temperature, as vibration will have a
greater effect. Use the figures provided in the specification relating to vibration to calculate the
duration and frequency of operating the tool.
Sound and vibration levels in the specification are determined according to international
standards. The figures represent normal use for the tool in normal working conditions.
A poorly maintained, incorrectly assembled, or misused tool, may produce increased levels of
noise and vibration. www.osha.europa.eu provides information on sound and vibration levels
in the workplace that may be useful to domestic users who use tools for long periods of time.
366649_Manual.indd 4
20/02/2019 10:22
Summary of Contents for TPL180
Page 2: ...2 2 3 5 4 1 12 6 7 9 10 11 8 13 21 20 17 19 18 14 15 16 366649_Manual indd 2 20 02 2019 10 22...
Page 3: ...3 A E I M II B F J N III C G K IV D H L I V VI 5 1 2 3 4 366649_Manual indd 3 20 02 2019 10 22...
Page 54: ...E PT E 54 RU 30 1 2 3 4 5 6 7 8 200 9 10 11 12 13 14 85 366649_Manual indd 54 20 02 2019 10 22...
