background image

Troubleshooting 

5-10

BASIC OPERATION GUIDE

MemoryCard err##

 

Press GO

A memory card error has occurred. Look at the error code given in place of 

##

 and 

refer to 

Storage Error Codes on page 5-12

. To ignore the memory card error, press 

[GO]

.

Missing

 

duplex drawer

The duplex drawer is either not installed or incorrectly inserted. Insert the duplex 
drawer securely.

 

No multi copies

 

Press GO

Multi copies cannot be printed because RAM disk is disabled or the hard disk is not 
installed. Press 

[GO]

 to print error report.

 

Paper jam

 

###############

A paper jam has occurred. The location of the paper jam is indicated in place of the 

#

’s. For details, see 

Clearing Paper Jams on page 5-14

.

 

Paper path error

There is no paper cassette in the feeder, or the cassette is not inserted properly. 
After reinserting the paper cassette, you should be able to print. When two or more 
optional feeders are installed and the lowest one is selected, the same message 
will appear if any of the upper paper feeder and the printer cassette is improperly 
installed.

Print overrun

††

 

Press GO

The print job transferred to the printer was too complex to print on a page. Press 

[GO]

 to resume printing. (A page break may be automatically inserted in some 

places.).
You can abandon printing by pressing 

[CANCEL]

.

If Auto Error Clear is set to 

On

, printing will be automatically resumed after a preset 

period of time. For details on Auto Error Clear, refer to 

Using the Operator Panel

section of the 

Advanced Operation Guide.

RAM disk error##

 

Press GO

A RAM disk error has occurred. Look at the error code given in place of 

##

 and 

refer to 

Storage Error Codes on page 5-12

. To ignore the RAM disk error, press 

[GO]

.

Replace toner

 

C,M,Y,K

Replace toner

 

Clean printer

Two message items are displayed alternately. Toner has run out in the toner 
container(s). Replace the toner container using a new toner kit for the particular 
color. The printer does not operate when this message is displayed.
For example, if 

Replace toner C,K

 is displayed, replace the cyan and the black 

toner containers.

Set paper

 

Press GO

The MP tray is out of paper. Load paper and press 

[GO]

. (Note that feeding the 

paper having a paper size which does not match the current paper size from the 
MP tray can cause paper jam.)

Toner low 

 

C,M,Y,K

Replace the toner container using a new toner kit. Color of the toner container that 
needs to be replaced is represented by 

C

 (Cyan), 

M

 (Magenta), 

Y

 (Yellow), and 

K

 

(Black).

Top tray 

 

paper full

The top tray has become full (approx. 250 pages). You must remove all printed 
pages from the top tray. When the printer detects that the top tray is empty again, 
the printer will continues printing into the top tray.

Message

Corrective Action

Summary of Contents for CLP 4416























































































Reviews: