Troubleshooting
6-7
Paper path error
When one or more optional feeders are installed, this message will appear if any of the paper
feeders or the printer cassette upper than the selected one is not properly closed.
Print overrun
Press GO
The print job transferred to the printer was too complex to print on a page. Press
[GO]
to
resume printing. (A page break may be automatically inserted in some places.)
You can abandon printing by pressing
[Cancel]
.
If
Auto Error Clear
is set to
On
, printing will be automatically resumed after a preset
period of time.
RAM disk error##
Press GO
A RAM disk error has occurred. Look at the error code given in place of
##
and refer to
Storage Error Codes
on page
6-8
. To ignore the RAM disk error, press
[GO]
.
Replace toner
Clean printer
Toner has run out in the toner container. Replace the toner container using a new toner kit.
The printer does not operate when this message is displayed.
Toner low
Replace the toner container using a new toner kit.
Unknown toner
installed
Displayed when the installed toner is not the original TA Triumph-Adler product. Install
TA Triumph-Adler original toner.
USB memory err##
Press GO
An error has occurred in the USB flash memory. Look at the error code given in place of
##
and refer to
CompactFlash (CF) Card and USB Flash Memory Errors
on page
6-8
. To return
the printer to the print-ready status, press
[GO]
.
Use alternative?
Cassette 1
When the cassette does not contain any paper that matches the print data (paper size and
type), this message allows you to specify an alternative cassette to use instead. A paper
source number is only displayed when an optional paper feeder is installed. To print from a
different paper source, refer to
Paper Feed Mode (Setting the paper feed source)
section in
the
Advanced Operation Guide
.
Wrong ID
The ID or Password entered for the Security or Administrator function is not correct. Check
the ID or Password.
For more information, refer to
Security
section and
Admin (Administrator settings)
section in
the
Advanced Operation Guide
.
Wrong Password
The password does not match the password set. Enter the correct password. For more
information, refer to
Security
section and
Admin (Administrator settings)
section in the
Advanced Operation Guide
.
Message
Corrective Action
Summary of Contents for LP 4230
