© 2016 Escalade Sports
For Customer Service Call 1-888-996-2729
7
All Rights Reserved.
P6
P6
P6
P6
H3
H3
H3
H3
P5
P5
P4
P4
PARTS REQUIRED:
24 pcs -
H3
Phillips Round Head Screw
2 pcs -
P4
End Leg Panel with Graphic Artwork
2 pcs -
P5
End Leg Panel without Graphic Artwork
4 pcs -
P6
Leg Leveler
FIGURE 2
STEP 2:
Install
P4
End Leg Panels with Graphic Artwork and
P5
End Leg Panels without Graphic Artwork to
Legs using
H3
Phillips Round Head Screws as shown in
FIGURE 2.
Tighten, but do not strip out H3 Screws.
Thread
P6
Leg Levelers to Legs as shown in
FIGURE 2
.
NOTE:
Graphic Artwork must
face out and upside down
NOTE:
Graphic Artwork
must face out and
upside down
THIS STEP REQUIRES FOUR OR MORE ADULTS.
VERY CAREFULLY TURN THE TABLE OVER AND SET IT ON
ITS LEGS. BE CAREFUL. THE TABLE IS VERY HEAVY.
IMPORTANT NOTE:
Slightly push in on
all connectors to insure
proper connections.
