Products Appearance Description
WiFi NVR Kits Quick Installation Guide
This WiFi NVR Kit requires no communication cable, no complex set up, but offers easy plug and play
installation, wireless communication using automatic passwords generation mechanism to ensure that
the video will be not ‘”tapped” under the default passwords. So use our system with confidence (the
codes have been paired: in case the ESSID and passwords are changed, you need to match the codes
first).
1. Install HDD.
Make sure power is cut to the NVR before installing. Required installation tool: Cross screwdriver.
Notes:
Please use only recommended professional surveillance hard disk.
Notes：Images are for guidance only. The actual product may differ in some regards from those shown.
Notes: Images are for instruction use only, as the actual model my differ from above illustrations.
1. Unscrew the four fixed screws on the base plate and
remove the upper cover.
3. Connect the HDD power cable and data cable between
PCB board and HDD.
2. Fix the HDD on the bottom panel with screws.
4. Fix the upper cover with screws.
Below are key parts of your NVR device, for easy identification.
LAN
Power input port
VGA
HD
Audio Output
Antenna
Antenna
