3. Adjusting the Antenna:
The NVR antenna transmits signals to the surroundings. When the NVR and the IPC antenna are at the
same height and parallel to each other, the communication is optimised. If the NVR can not be the same
height, the IPC antenna should be at a tangent to the sphere with the center of the NVR (Figure 2-2).
Antenna should not point directly to NVR (Fig 2-1). Follow the figure as guide to optimal placement.
Notes：
Images are for guidance only. The actual product may differ in some regards from those shown
WiFi IPC
Multiple display
monitoring equipment
HD/VGA
WiFi NVR
Internet
WiFi
Internet picture transmission
2. Make sure WiFi NVR Kits is working well.
Connect NVR to a monitor, and ensure all devices are powered on. Cameras auto-pair with NVR. No
complex settings needed. When all the IPC videos appear on the display, the device is working normally
Notes: Please make sure the NVR video output and monitor input have been connected. Please use
the matched power supply in the package to prevent the NVR from working improperly or damaging
the NVR through the use of a wrong power supply.
and is ready for the next steps.
