background image

19

Funzionamento 

•  Modulo elettronico incorporato per il funzionamento a scelta 

con un tradizionale regolatore di marcia in corrente continua 

(max. 12 volt), Trix Systems, Trix Selectrix oppure sistemi 

digitali in base alla normativa NMRA.

•  Riconoscimento automatico del sistema tra esercizio Digital 

ed analogico. Nessun riconoscimento automatico del sistema 

tra Selectrix (SX) e DCC. 

•  La completa dotazione di funzioni è disponibile soltanto sotto 

Trix Systems e sotto DCC.

•  Illuminazione dipendente dal senso di marcia.Commutabile nel 

funzionamento Digital.

Istruzioni per la funzione digitale: 

•  In occasione del primo esercizio in un sistema Digital (Selectrix 

oppure DCC) il Decoder deve venire impostato per questo siste-

ma Digital. A tale scopo il Decoder si deve programmare almeno 

una volta in questo sistema Digital ( ad es. modificare l’indirizzo).

•  L’esatto procedimento per l’impostazione dei differenti para-

metri siete pregati di ricavarlo dalle istruzioni di servizio della 

Vostra centrale per molti treni.

•  Una corretta programmazione con la Mobile Station 66920 è 

possibile soltanto a partire dal numero di versione 034.

•  Un funzionamento con tensione continua di polarità invertita 

nella sezione di frenatura, in caso di esercizio con DCC, non 

è possibile. Se si desidera questa caratteristica, si deve in 

tal caso rinunciare al funzionamento tradizionale in corrente 

continua (CV29 / Bit 2 = 0). 

Avvertenze per la sicurezza 

•  Tale locomotiva deve venire impiegata soltanto con un sistema 

di esercizio prestabilito a questo scopo.

•  Vogliate osservare assolutamente le avvertenze di sicurezza 

nelle istruzioni di impiego del Vostro sistema di funzionamento.

•  Per il funzionamento tradizionale della locomotiva il binario di 

alimentazione deve essere protetto dai disturbi. A tale scopo 

si deve impiegare il corredo antidisturbi 611 655. Tale corredo 

antidisturbi non è adatto per il funzionamento Digital.

•  Nell’interfaccia a 21 poli deve venire innestato soltanto il 

Decoder Trix montato dalla fabbrica. 

•  AVVERTIMENTO! Questo prodotto contiene magneti. 

L‘ingestione di più di un magnete può causare la morte. In 

caso di ingestione informare immediatamente un medico. 

Qui di seguito vengono descritte le operazioni di manutenzione che si 

verificano nel normale esercizio. Per riparazioni oppure parti di ricam-

bio Vi preghiamo di rivolger Vi al Vostro rivenditore specializzato Trix.

Trix non fornisce alcuna garanzia, assicurazione e risarcimento danni in 

caso di montaggio sui prodotti Trix di componenti non espressamente 

approvati dalla ditta. Trix altresì non risponde in caso di modifiche al 

prodotto, qualora i difetti e i danni riscontrati sullo stesso siano stati causati 

da modifiche non autorizzate o dal montaggio di componente esterni da lei 

non approvati. L‘onere della prova che i componenti montati e le modifiche 

apportate non sono state la causa del danno o del difetto, resta a carico del 

cliente o della persona / ditta che ha effettuato il montaggio di componenti 

estranei o che ha apportato modifiche non autorizzate.

Summary of Contents for 22141





































Reviews: