Trix 22398, Manual

7

Functions

•  This model is designed for operation with H0 2-rail 

DC systems (track according to NEM standards) with 

conventional DC power packs. 

•  This locomotive comes equipped with a Trix 

connector for digital operation and can 

have the Märklin-locomotive decoder 

60942/60947 installed in it. 

•  Trix motor vehicles must not be operated on digital 

systems without an built-in engine decoder (Motor can be 

damaged!). 

•  Minimum radius for operation is 360 mm / 14-3/16“.

Safety Notes

•  This locomotive is only to be used with the operating 

system it is designed for.

•  Analog max. 15 volts DC, digital max. 22 volts AC.
•  This locomotive must not be supplied with power from 

more than one power pack.

•  Please make note of the safety notes in the instructions for 

your operating system.

•  The feeder track must be equipped to prevent interference 

with radio and television reception, when the locomotive 

is to be run in conventional operation. The 611 655 inter-

ference suppression set is to be used for this purpose. 

The interference suppression set is not suitable for digital 

operation. 

• 

WARNING!

 Sharp edges and points required for operation.

•  Do not expose the model to direct sunlight, extreme 

changes in temperature, or high humidity. 

Important Notes

•  The operating instructions and the packaging are a com

-

ponent part of the product and must therefore be kept as 

well as transferred along with the product to others.

•  Please see your authorized Trix dealer for repairs or spare 

parts. 

•  The warranty card included with this product specifies the 

warranty conditions.

•  Disposing: www.maerklin.com/en/imprint.html