4
Charging
1.
Disconnect the power cable.
2.
Connect the USB charging cable to a USB port. The LED on the USB
charging cable lights red indicating that the battery is charging. When the
battery is fully charged, the LED on the USB charging cable turns off. It takes
about 60 minutes to recharge a discharged battery.
2.
Slide the battery into the battery
bay on the bottom of the drone.
Connect the power cable.
1.
Move the throttle/rotate stick
to the full down position.
Make sure you only charge the rechargeable battery with the supplied USB
charging cable. If you try to charge the rechargeable battery with a different
battery charger, this might cause serious damage.
Immediately after switching it on, place the drone on a flat and level surface.
The gyro-system will then set itself automatically.
Flying Your Drone
Summary of Contents for SKEYE
Page 1: ...SKEYE USER GUIDE Mini Drone ...
Page 16: ......
