background image

CALIBRATION  INSTRUCTIONS

 

The  Trojan 30+ was factory calibrated, however, calibration should be checked occasionally to 
assure optimum performance. 

1. 

Pull the on/off lever to the “OFF” position. 

Set the rate control plate to setting “B”. 

3. 

Loosen the rate control knob and slide the rate 

plate until the port is just opening. Loosen 
pointer screw and move pointer until it aligns 
with “B” on the rate plate. Retighten pointer 
screw. 

2. 

Flip on/off control lever to the “ON” position. 

Check the port opening. It should be just open. 
If adjustment is necessary, continue to step #3. 

Rate Control Knob 

Pointer 

Rate Control Plate 

 Port is just open 

Pointer Screw 

VIEW IS  

INSIDE OF 

HOPPER 

WARRANTY

 

 

 

 

Sherriff Amenity warrants to Purchaser the following:

 

 
1. Product will be free of defects in materials and workmanship for a period of one year from date of purchase. 
2. The axle gear, gear support, pinion gear, axle, and axle bearings have a limited lifetime warranty to be

 

free of defects in materials and workmanship. 

3. Sherriff Amenity will decide in its reasonable discretion if the part(s)/unit is defective. 
4. The spreader or part(s) will be shipped to Sherriff Amenity at the customer expense with a written description of defect to the attention of Sherriff                           
Amenity  WARRANTY DEPARTMENT. 
5. If the spreader is used for commercial rental the Limited Warranty shall be limited to a period of 90  days.   
6. All Unit and part replacement will be performed at the reasonable discretion of Sherriff Amenity .   
7. Labor charges are not covered and the unit need not be returned to the dealer for warranty service. 
8. Proof of purchase must be supplied to Sherriff Amenity . 

 

Sherriff Amenity's sole obligation under this warranty is limited to repairing or replacing the defective part.  Upon replacement of any Product or 
Product part, the replaced item shall become the property of Sherriff Amenity. If Sherriff Amenity determines that the Product covered by this warranty 
requires service, Sherriff Amenity shall prepay return shipping charges from Sherriff Amenity. In all other instances, such charges shall be paid by Pur-
chaser. Except for loss or damage caused by Sherriff Amenity's negligence, Purchaser relieves Sherriff Amenity  of responsibility for all risks of loss or 
damage to the Product and its parts during the period the products are in transit to and from Sherriff Amenity .   
 
This warranty does not extend to any Product or parts thereof that have been allowed to corrode,

 

subjected to misuse, neglect, accident, or  

modification by anyone other than Sherriff Amenity or that have been affixed to any nonstandard accessory attachment or that have been used, stored, 
installed, maintained or operated in violation of Sherriff Amenity ’s instructions or standard industry practice. No agent, employee or representative of 
Sherriff Amenity has any authority to bind Sherriff Amenity to any affirmation, representation or warranty concerning the Product and any affirmation, 
representation or warranty made by any agent, employee or representative shall not be enforceable by Purchaser.   
 

THIS WARRANTY EXTENDS ONLY TO THE ORIGINAL PURCHASER AND IS EXPRESSLY IN LIEU OF ANY OTHER EXPRESS OR IMPLIED 
WARRANTIES, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTY OR MERCHANTABILITY OR FITNESS OR INTENDED USE  
FOR A PARTICULAR PURPOSE AND OF ANY OTHER OBLIGATION ON THE PART OF PSB

 

SHERRIFF AMENITY SHALL NOT BE LIABLE FOR ANY INCIDENTAL, SPECIAL OR CONSEQUENTIAL LOSS, DAMAGE OR EXPENSE  
DIRECTLY OR INDIRECTLY ARISING FROM THE USE OF ANY OF THE PRODUCT INCLUDING, BUT NOT LIMITED TO, DAMAGE OR LOSS OF 
OTHER PROPERTY OR EQUIPMENT, LOSS OF PROFITS OR REVENUE, COST OF CAPITAL, COST OF PURCHASED OR REPLACEMENT 

GOODS, OR CLAIMS 

OF CUSTOMERS OF PURCHASER. 

 

 

Summary of Contents for 30 +









Reviews: