苏
州
特
鲁
利
电
子
材
料
有
限
公
司
Suzhou Trojan Industry Material Co.
，
Ltd
Building A,No.53#, Xinze Road,Singapore Industry Park,Suzhou,Jiangsu Province,
China.
Tel: 0512-67580617 Fax: 0512-67508229
10
1. Exhaust fan. 3x380V
，
85W..
2. Side opening: When the length of the sample exceeds 420 mm, the side
opening can be removed.
3. Left opening on the vertical cabinet. Open the door to connecting the intake
pipe and drainage pipe.
4. Load-bearing casters with moving wheels. When the equipment need to
move on the flat ground. Rotate the adjusting nut and the moving wheel
touches the ground while the supporting part of the load-bearing wheel is
retracted. When the supporting parts of the four load-bearing casters are
retracted, the equipment can be propelled.
5. Safety Door Switch
6. 7 Inch Touch screen.
7. Emergency stop button.
8. XYZ three-axis Joystick
9. Three-axis joystick activated button. The joystick can only be usable by
pressing down this button.
10. Front opening of the vertical cabinet. Place or remove the water tank.
11. Side plate of electronic control box. Maintenance or inspection of
electronic control problems.
12.
Z-axis limit switch
13.
Main power switch.
14.
Main power cable, 3x380V, and 1 grounding wire
Changes Of Cutting wheel
Replace the cutting wheel with an open end Wrenches (32mm). Press down the pin of
the lock cutting shaft and tighten/loosen the lock nut with the wrench. (See chart below)
此方向松开螺母
（
Unlocking direction
）
（
Keep pressing to lock the arbor shaft
）
（
Key 32mm
）
