苏
州
特
鲁
利
电
子
材
料
有
限
公
司
Suzhou Trojan Industry Material Co.
，
Ltd
Building A,No.53#, Xinze Road,Singapore Industry Park,Suzhou,Jiangsu Province,
China.
Tel: 0512-67580617 Fax: 0512-67508229
12
4.
Water pump. Pagoda Joint with 19 mm Outer Diameter. Pump voltage:
3x380V, 250W. Flow speed : 100L/min.
Note: The water level in the water tank should be checked regularly.
Pumps are strictly prohibited from working for long periods of time
without water.
Equipment Operation
Design Concept
1. Beta-300Pro is a fully automatic cutting machine which can automatically adjust the feed
rate, determine whether the cutting process has completed and the cutting wheel will be
cut repeatedly in pulse mode. The above judgment of equipment operation mode is based
on the current-changes of motor. If the feed rate is too fast, the current will rise obviously,
and if the feed rate is too slow, the current will remain at a low level. More details as follow:
Automatically adjust feed rate: Set up a low current value (IL) and a high current value (IH),
if the current is less than IL, the feed rate will increase. if the current higher than IL, the
feed rate will be decreased.The increase or decrease of feed rate can be set in the
"parameters" page.
Auto-detect whether cut-off: Set a no-load current (In), during the cutting process, if the
current continues to be lower than In, then it is determined that the sample has been cut
1
）
2
）
3
）
4
）
