苏
州
特
鲁
利
电
子
材
料
有
限
公
司
Suzhou Trojan Industry Material Co.
，
Ltd
Building A,No.53#, Xinze Road,Singapore Industry Park,Suzhou,Jiangsu Province,
China.
Tel: 0512-67580617 Fax: 0512-67508229
14
Note: The sample with arc or inclined surface in the cutting
route, it is not recommended to use "Auto Find Origin"
function. See the right picture.
6
）
Zero, Origin: Take Y axis as an example, X axis, Z axis is
similar to Y axis.
Zero position: The position of the table away from the direction of the cutting wheel
and touches Y- limit switch is defined as Zero. Zero is the origin of the coordinate
and an absolute position point returned when the "return to zero" operation is
performed.
Origin position: before cutting process, the position of the table defined as “ Origin”.
Because of the shape of the sample or the clamping position is different, the Origin
position is usually determined by manipulating the joystick. Make the sample as
close as possible to the cutting wheel when finding the Origin, so that the cutting
timing will be reduced. The origin also can be found by "Auto Find Origin" function.
Endpoint: the maximum travel distance of the table ( or the table touches Y+ limit
switch) is defined as the end point. If the "Auto detect whether cut-off" function is
not enabled, the end point of each (or every step) cut is the end point.
Operating Interface
The main interface and the function of each part are described below.
Y
Y
o
Y
△
o
Y
Max
零点
(Zero)
起点
(Origin)
终点
(Max. travelling distance)
切割方向
（
Feeding direction
）
切割片
（
Cutting Wheel
）
待切割试样
（
Sample to be cut
）
