10167-10
STEP 5
• Remove the 4 pre-assembled Screws (65) from
the Computer (7).
• Connect Middle Section Sensor Wire (9) to the
Sensor Wire on Computer (7).
• Attach the Computer (7) to top bracket of
Front Post (15) with 4 Screws (65).
• Insert the plug of Hand Pulse Wire (6) to the
Jack of the Computer (7).
STEP 6
• Attach the Pedal Straps (43R/43L) to the
Pedals (44R/44L).
Note: The end with 4 adjustable holes must be set
outwards.
• The Pedals (44R/44L) and Crank Arms (45)
are marked with “R” & “L”(right and left).
Connect each Pedal (44R / 44L) to the
matching Crank Arm (45).
Note: The Right Pedal “R” should be threaded on
clockwise. The Left Pedal “L” should be threaded on
counter-clockwise.
ASSEMBLY STEPS
Recheck
all bolts and nuts are
tightened securely
before using the machine
CAUTION
: Ensure that cables are not damaged
during assembly or when tightening screws
Summary of Contents for ENDURO 320
Page 6: ...10167 6 3 HARDWARE LIST ...
Page 17: ...10167 17 11 EXPLODED DRAWING ...