25
MAINTENANCE
CLEANING
The Trojan Fluid 300 Elliptical Trainer can be cleaned with a soft cloth and mild detergent. Do not use abrasives
or solvents on plastic parts. Please wipe your perspiration off The Trojan Fluid 300 Elliptical Trainer after each
use. Be careful not to get excessive moisture on the Console display panel as this might cause an electrical
hazard or electronics to fail.
Please keep The Trojan Fluid 300 Elliptical Trainer especially the Console, out of direct sunlight to prevent
screen damage.
Please inspect all assembly bolts and pedals on the machine for proper tightness every week.
STORAGE
Store The Trojan Fluid 300 Elliptical Trainer in a clean and dry environment away from children.
TROUBLESHOOTING
PROBLEM
SOLUTION
There is no display on the Console.
1.
Remove the computer Console and verify the wire that
comes from the Console is properly connected to the wire
that comes from the Main Frame.
2.
Check if the batteries are correctly positioned and that the
battery springs are in proper contact with batteries.
3.
The batteries in the Console may be dead. Change to new
batteries.
Squeaking noise when in use.
There may be a loose bolt, please inspect the bolts and tighten if
necessary
Summary of Contents for FLUID 300
Page 10: ...10 EXPLODEDDRAWING EXPLODED DRAWING...
Page 11: ...11 EXPLODEDDRAWING...
Page 28: ......
