苏
州
特
鲁
利
电
子
材
料
有
限
公
司
Suzhou Trojan Industry Material Co.
，
Ltd.
地地址：
江苏省苏州市工业园区新泽路 53 号 A 幢
电话：
0512-67580617
传真：
0512-67508229
Step 3: Loosen holding ring collar on the head post and slide down out of the way.
Step 4. Rotate release lever slightly to lower the head.
Step 5. Slide the holding ring collar up to the bottom of the head and tighten.
Step 6. Lift head by rotating release lever to engage button on bottom of the head. Remove cardboard and
lower head.
Step 7. In the head
’s manual mode, lower pistons with the piston down switch. Verify that the bottom of the
pistons are not rubbing against the abrasive surface. (Note it is better to operate the specimen holder as close to
the working abrasive wheel as possible in order to get flatter specimens).
Step 3: Loosen and lower post holding
collar
Rotate lever to disengage button
