background image

15

 

4) Press 

 to start Trojan Ignite 350 Treadmill, the Trojan Ignite 350 Treadmill will 

start with a speed of 1.0 km/hr. During the workout press the

keys to 

increase/decrease the speed. Press 

 to control the incline angle. Press

and the Trojan Ignite 350 Treadmill will stop. If you press

once, the 

window will display

and all the values will stop changing. The Console 

will reset to the START/READY status after 60 seconds. If you press

for a 

second time and hold the

button for 3 seconds the Trojan Ignite 350 Treadmill 

will automatically reset to the START/READY position.

 

5) Under the START/READY status press 

 to enter into the other functions. 

Press 

 to switch between Speed/Distance and CAL/Incline during workout.

 

** If the safety key/clip is not placed in the recess of the Console, all the 
windows will display “----”, which means the Trojan Ignite 350 Treadmill cannot 

 

work normally.

 

6) Press 

to start the fan and press it again to stop it.

 

** When the SAFETY KEY is taken off and then replaced, the Trojan Ignite 350 
Treadmill will not reposition itself to the start position (flat). You need to press 
the START key to reposition the Trojan Ignite 350 Treadmill.

 

** When the power is on, the Trojan Ignite 350 Treadmill will not reposition itself 
from any operating position it is in. You will need to press the START key to 
reposition the Trojan Ignite 350 Treadmill.

 

** Under START/READY status if you press and hold the STOP key for 5 seconds, 
the Trojan Ignite 350 Treadmill will reposition itself from any position it is in.

 

**Whilst operating any of the programs if you press the STOP key the program 
will stop. If the user wants to resume the program, press the START key. If the 
user wants to exit the program press the STOP key again and the Console will 
revert back to the START/READYstatus.

MODE FUNCTION KEY: 

1) Under the START/READY mode, press 

 and the SPEED window will flash. 

Under this mode, press

or to switch between P1 - P9.

 

2) P1 - P3: TIME GOAL, DISTANCE GOAL, CALORIE GOAL

 

2.1) After entering P1, you can set target time. The setting range is (5 - 99 min), 
with a preset value of 20 min. Set the desired time using

or    

 

. After setting the time, press 

 to start with the slowest speed. During 

the workout you can change the speed using the Speed buttons.

 

2.2) After entering P2, you can set target distance. The setting range is 1 - 9.9 km,

 

with a preset value of 5 km. Set the desired distance using 

 or 

After setting the distance, press 

 to start with the slowest speed. During the 

workout you can change the speed using the Speed 

 

buttons.

CONSOLE FUNCTIONS

Summary of Contents for IGNITE 350





























Reviews: