background image

1575-22

9. EXERCISE PROGRAM

DEVELOPING AN EXERCISE PROGRAMME

For the first month of training you should allow your body to adjust to its new workload. For the 2 to 4 weeks  

 

you should only perform one work set of each exercise, only increasing the number of sets you perform after  

 

this adjustment period.
Develop your workout according to the time available to you and remember, the more effort you put in, the  

 

greater the benefits and the quicker you will see results.
 

 

DIET

Diet is a very important aspect of any fitness programme. A balanced diet will help you get to your goal weight.
For tips on diet, check out our website www.trojanhealth.co.za

EXERCISE TECHNIQUE

Hand Grips

There are two styles of handgrips that can be used when exercising:
• Overhand Grip 
 

The bar is gripped with the hands reaching over the top of the bar and the palms facing in towards the body

•Underhand Grip 
 

The bar is gripped with the hands reaching under the bar and the palms facing away from the body.

Breathing

Breathing at the correct time is an important part of weight training. Breathe out while you are putting the effort into the 
movement, i.e. when you are lifting or pushing the weight. Breathe in on the return movement or the part of the move-
ment that requires the least effort. Never hold your breathe during an exercise.

Exercise Style

All exercises should be done in a controlled manner. Do not jerk the weight around as this can lead to injury as well as 
limiting the benefit of the exercise.

THE WORKOUT

The Warm Up

Always warm up thoroughly before each workout session to help minimise the risk of injury. Warm up on any Trojan 
exercise bike or treadmill or any other similar machine.

Weekly Routine

Perform a weight training routine 3 times per week, ensuring a day of rest and recovery between sessions.

Summary of Contents for iSMART 600

































Reviews: