background image

25

TROUBLESHOOTING

This Trojan Marathon 230 Treadmill is designed in a way that in the event of an electrical fault, the machine 
will turn off automatically to prevent any injuries to the user and any damage to the machine (i.e. motor). 
When the Trojan Marathon 230 Treadmill behaves erratically, simply reset it, by turning the power switch off, 
waiting for 1 minute then turning the power button back on. If, after you have reset the Trojan Marathon 230 
Treadmill, it is still not running correctly, please run the self-checking analyse (please refer to Self-Checking) 
to distinguish what type of error problem the machine is encountering.

ALARM SIGNALS

E0: SAFETY KEY NOT IN THE POSITION 

• 

Put the safety key in the position. 

E1: NO FEEDBACK FROM CONTROLLER OR SPEED SENSOR

• 

Check the condition of cables and ensure that all plugs are connected between the motor controller 
and display.

• 

Check that the speed sensor and magnet are in correct alignment and that there are no obstructions on 
the magnet (the magnet can be found on the front roller near the motor belt).

• 

If the running belt moves, then displays the E1 error after 10 seconds, replace the speed sensor.

• 

If the running belt does not move, replace the controller.

E2: CONTROL PROTECTION IS ACTIVE TO PROTECT CURRENT OVERLOAD ON TREADMILL

E3: SELF-CHECKING FAILURE

• 

If the running belt does not move, replace the controller.

• 

Ensure that all plugs are connected between the motor controller and display.

• 

Check that the speed sensor and magnet are in correct alignment and that there are no obstructions on 
the magnet (the magnet can be found on the front roller near the motor belt).

E4: MOTOR IS NOT CONNECTED PROPERLY OR NOT CONNECTED TO THE CONTROLLER

E5: CHECK FOR PROPER CONNECTION BETWEEN THE CONSOLE AND CONTROLLER

NO POWER

• 

Check fuses (they are located on the controller under the motor cover).

• 

Check power outlet (plug something else into the power outlet to ensure that the power outlet is 
working correctly).

• 

Check Power Cable (you may need to take it to an electrician).

Summary of Contents for MARATHON 230





























Reviews: