13
ASSEMBLY STEPS
STEP 3:
Attach the Saddle (39) to the Saddle Tube
(38) with Nylon Nut (M8) (34) and Washer
(D8) (35)
Put the Saddle Tube (38) into the Main
Frame (40) and align the holes, lock it tightly
with the Saddle Post (31).
Align the holes and fix in place with the
Locking Knob (M10) (32) and Washer (D10)
(33).
Secure the seat in position with the Knob
(M16 x 1.5) (30). The correct height for the
seat can be adjusted after the bike is fully
assembled.
STEP 3
STEP 4:
Attach the 5a sensor wires on the
Handlebar (5) to the 1b sensor wires on the
Console (1). Attach the Sensor Wire (20) on
the Support Tube (12) to the Sensor Wire
(1a) on the Console (1)
Install the Console (1) into the Support
Tube (12) using Bolt (M8) (2)
Attach the Handlebar (5) to the Support
Tube (12) using the Bolt (M8 x 60) (8) and
the Handlebar Plastic Cover (9).
STEP 4
#20M03T008 OMEGA 390 STATIONARY BIKE USER MANUAL.indd 13
2020/03/25 3:59 PM
