Trojan PULSER 500, Care Instructions And Assembly Manual

1064M-9

4. COMPUTER FUNCTIONS

FUNCTIONS

TIME

Count up

No preset target. Time will count up from 00:00 to 99:59 (maximum) 

where each increment is 1 second.

Count down

If training with a preset Time.  Time will count down from preset time to 

00:00.Each preset increment or decrement is 1 minute between 1:00 to 

99:00 minutes.

SPEED

Display current training speed from 0.0 to maximum 99.9 km or ml.

RPM

Display current training rotation per minute.

DISTANCE

Count up

No preset target. Distance will count up from 0.00 to 99.90 (maximum) 

with each increment 0.1 KM.

Count down 

If training with a preset target. Distance will count down from preset 

distance to 0.00. Each preset increment or decrement is 0.1 KM (or ML) 

between 0.00 to 99.90.km.

CALORIES

Count up

No preset target. Calories will count up from 0 to 990 (maximum) with 

each increment 1 cal.

Count down

If training with preset Calorie target. Calories will count down from preset 

calories to 0. Each preset increment or decrement is 10 cal from 0 to 990 

cal.

HEART SYMBOL

When the monitor receives a heart rate signal, the symbol will start blinking.

PULSE

The monitor can detect pulse signals from the handgrip or chest belt. The monitor will 

always display the chest belt reading if your hands are on the handgrips and you have the 

chest belt on.  

WATT

Display current training watt figures.

HR LED BAR 

Display HR percentage from 55% to 95%.

FUNCTION BUTTONS

MODE

Push to confirm all settings and to enter into exercise mode.

UP

To select training mode and adjust function value up.

DOWN

To select training mode and adjust function value down.

START/STOP 

To start or stop training.

RECOVERY

RECOVERY :  After exercising for a period of time, keep holding on handgrips (if you do not have the 
heart rate belt on) and press the “RECOVERY” button. All function displays will stop except “TIME” 
starts counting down from 00:60 to 00:00. Screen will display your heart rate recovery status with  
F1,F2….to F6. F1 is the best and F6 is the worst. User may keep exercising to improve the heart rate 
recovery status. (Press the RECOVERY button again to return the main display.)
(If the monitor does not receive a heart rate signal, the RECOVERY function can not work.)

RESET 

Return to main menu in stop mode and clean all preset function value to zero.

TOTAL RESET  To power on the computer.

NOTE:

1.   

To rate your pulse recovery correctly you must test it straight after finishing 

your workout.  The test will last 1 minute and then the results (F1 - F6) 

will be dispayed on screen.

E 1 :   Message appears on the screen when the palms of your hands are not correctly 

placed on both the contact pads.

E 2 :   Message appears on the screen because you have not stopped exercising.

Recovery Grade

F1  EXCELLENT

F2  VERY GOOD

F3  GOOD

F4  SATISFACTORY

F5  BELOW AVERAGE

F6  POOR