12
10388
ASSEMBLY STEPS
STEP 4: HANDLEBAR INSTALLATION
•
Remove two M8 x 15 Hexagon Bolts (24) and two
Ф
8 x
Ф
16 Flat Washers (37) from the
Handlebar Post (3). Remove bolts with S6 Allen Wrench provided.
•
Attach the Handlebar (2) onto the Handlebar Post (3) with two M8 x 15 Hexagon Bolts (24) and
two
Ф
8 x
Ф
16 Flat Washers (37) that were removed. Tighten bolts with S6 Allen Wrench provided.
STEP 5: COMPUTER INSTALLATION
•
Remove four M5 x 10 Cross Pan Head Screws (64) from the Computer (10). Remove screws with
the Multi Hex Tool with Phillips Screwdriver provided.
•
Connect the Extension Sensor Wire (59) and Hand Pulse Sensor Wires (53) with the wires that
come from the Computer (10). Tuck wires into the hole of Handlebar Post (3), then attach the
Computer (10) onto the top end of Handlebar Post (3) with four M5 x 10 Cross Pan Head Screws
(64) that were removed. Tighten screws with the Multi Hex Tool with Phillips Screwdriver provided.
TOOL:
Multi Hex Tool with Phillips
Screwdriver (S13, S14, S15)
Allen Wrench (S6)
STEP 4 & 5
Summary of Contents for PURSUIT 360
