11
ASSEMBLY STEPS
STEP 3: HANDLEBAR AND HANDLEBAR POST INSTALLATION
Attach the Handlebar (8) to the Handlebar Post (4) using 4 Screws (M8 X 16 X S6) (38) and
4 Washers (D8.5 X Ø16 X 1.5) (39). Tighten and secure using Allen Wrench (S6) (26).
Attach Seat (98-2) (66) to Seat Slider (2) using Spanner (S = 13, 14, 15) (25).
Loosen and remove the Seat Slider Adjustment Knob (Ø50 X 20 X M8 X 15) (73). Insert Seat Slider (2) with
Seat (98 - 2) (66) into the Seat Slider Tube (5). Adjust the Seat Slider (2) to the desired position and reinsert and
tighten the Seat Slider Adjustment Knob (Ø50 X 20 X M8 X 15) (73) to secure in place.
STEP 3
#20M01T007 SPIN 120 UM.indd 11
28/01/2020 08:39
