15
CONSOLE FUNCTIONS
FUNCTION BUTTON:
MODE:
Press MODE to choose functions. Press the “MODE” key for 3 seconds to
reset all valuas to 0 (except ODO). Press to activate console from sleep
mode.
SCAN -> TIME -> SPEED (SPD) -> DISTANCE (DIST) -> CALORIES (CAL) ->
TOTAL DIST (ODO) -> RPM -> PULSE RATE
RPM:
The revolutions per minute will be show when exercising.
SCAN:
This function allows the screen to automatically scan through the different
functions. Changing screen every 6 seconds.
TIME->SPEED->DISTANCE->CALORIES->TOTAL DIST->RPM->PULSE->RATE
TIME:
The total exercise time will be shown whilst exercising.
SPEED:
The current speed will be show whilst exercising.
DISTANCE:
The distance of each workout will be shown whilst exercising.
CALORIE:
The calories burned will be shown whilst exercising.
PULSE:
The current pulse rate will be show whilst exercising.
TOTAL DISTANCE (ODO):
The total distance of all workouts done will be show when you start
exercising.
SLEEP MODE:
System will go into sleep mode automatically when the sensor has had no
signal input for approximately 4 minutes.
BATTERY:
This Console uses two AAA batteries. If the display appears incorrectly or
becomes difficult to read, please install new batteries. Always change both
batteries at the same time.
#20M01T007 SPIN 120 UM.indd 15
28/01/2020 08:39
