13
ASSEMBLY STEPS
STEP 5: HANDLEBAR AND CONSOLE INSTALLATION
Attach the Handlebar (8) to the Main Frame (1) using 4 Screws (M8 x 16 x S6) (37) and 4 Washers (D8.5 x Ø16 x 1.5)
(38). Tighten and secure using Allen Wrench (S6) (36).
Attach the Console (9) to the bracket located on the Handlebar (8) using 2 Screws (M5 x 10 x Ø12) (85).
Tighten and secure using Allen Wrench (S6) (25).
Connect the link wire of the Console (9) to the link wire of Inductor (L=360mm) (11).
STEP 5
#20M03T011 SPIN1200 USER MANUAL.indd 13
2020/03/25 2:55 PM