15
ASSEMBLY STEPS
TRANSPORTING THE BIKE
To move the bike, first ensure that the Handlebar (8) is properly secured. If the handlebar is loose, tighten the
Adjustment Knob (32) to secure it. Next, stand at the front of the bike so that you’re directly in front of the
handlebar. Firmly grasp and hold each side of the Handlebar (8), place one foot on the Front Stabiliser (6) and
tilt the bike towards you until the transportation wheels on the Front Stabiliser (6) touch the ground. With the
wheels on the ground, you can transport the bike to the desired location with ease.
NOTE:
When moving the bike, always use caution as unexpected impact, such as dropping the bike, may cause
injury and affect the bike’s performance.
#20M03T011 SPIN1200 USER MANUAL.indd 15
2020/03/25 2:55 PM
