18
FUNCTION BUTTON:
ALARM:
Time, Distance and Calorie can be set as a countdown workout. Once on the
desired function, press MODE to select the function and press SET to adjust
to the desired countdown value. Once the desired value has reached 0, the
console will beep for 15 seconds.
AUTO ON/OFF &
If there is no reading for 8 minutes, the power will turn off automatically.
START/STOP:
As long as the wheel is in motion or buttons are pressed the console will
remain on.
RESET:
All set parameters will be reset.
SWITCH KEY MODE:
Each time MODE is pressed, it will change to the MODE setting: SCAN > TIME
> SPEED > DISTANCE > CALORIE > ODO > PULSE. To reset the console, hold
the MODE button for 2 seconds.
FUNCTIONS AND OPERATIONS:
KEY FUNCTIONS:
Put 2 AA batteries into the console, which will provide an activation beep
and the LCD displays all functions for approximately 2 seconds.
SCAN:
Press MODE button until “
▼”
appears on SCAN. At this setting, the console
will rotate through each of the 5 different functions: Time, Speed, Distance,
Calorie and Trip Distance. Each of these functions will be displayed for 6
seconds.
TIME:
Press MODE button until “
▼
” appears on TIME. At this setting a count of
the total time from the start of the exercise will be displayed.
SPEED:
Press MODE button until “
▼
” appears on SPEED. At this setting the current
speed will be displayed.
CONSOLE FUNCTIONS
SPECIFICATIONS:
AUTO SCAN Every 6 Seconds
RUNNING TIME 00:00 - 99:59 Min:Sec
CURRENT SPEED 0.0 - 999.9 KM/H or MI/H
TRIP DISTANCE 0.00 - 999.9 KM
CALORIES 0.00 - 999.9 ~ 9999 CAL
TOTAL DISTANCE 0.00 - 9999 KM
PULSE RATE 40 - 240 BPM
BATTERY TYPE 2 X AA
OPERATING TEMPERATURE 0° ~ +40°C
STORAGE TEMPERATURE -10° ~ +60°C
Summary of Contents for SUMMIT 280
Page 10: ...10 EXPLODEDDRAWING...
Page 11: ...11 EXPLODEDDRAWING...
