11
TR 1500 - T
ASSEMBLY STEPS
1. PREPARATION
•
Before assembling make sure that you will have enough space around the item.
•
Use the supplied parts and hardware for the assembly.
•
Before assembling please check whether all the required parts have been supplied as per the exploded
drawing on the opposite page.
STEP 1
STEP 1:
Open the carton, remove all the parts and place the Main
Frame (1) on a flat and dry surface.
Note:
Please do not cut the packing straps immediately.
STEP 2:
Cut the straps when the main frame has been securely
placed on a flat and dry surface.
Note:
Do not move it any more.
Connect the Controller Wire (90) and the Lower
Extension Wire (89).
Secure the Left and Right Upright Tube (3) on the Bottom
Frame (1) with the Hex Socket Screws (50) and the Lock
Washer (73).
Note:
Please do not tighten the Hex Socket Screw (50)
for the time being.
Insert the Protective Guard (19L/R) into the Left and
Right Upright Tube (3).
STEP 2
Summary of Contents for TR 1500
Page 10: ...10 TR 1500 T EXPLODEDDRAWING...
Page 32: ...32 TR 1500 T NOTES...
