10
10335
ASSEMBLY STEPS
1. PREPARATION
• Before assembling make sure that you will have enough space around the item.
• Use the provided tools for the assembly.
• Before assembling, check whether all the parts needed have been supplied.
1
2
STEP 1: fRONT ANd REAR
STAbILISERS
Attach the Front Stabiliser (15) to the Main Frame
(16) using two
Arc Washers (5), two Domed Nuts (6) and two
Carriage Bolt (3).
Attach the Rear Stabiliser (4) to the Main Frame
(16) using two Arc Washers (5), two Domed Nuts
(6) and two Carriage Bolts (3).
STEP 2: SEAT ASSEMbLy
Slide the Seat Post (12) into the Vertical Seat Post
(10) at the desired position by aligning the holes
and locking it in place with the Locking Knob (25)
and the Flat Washer (26).
Now attach the Seat (13) to the Seat Post (12) and
tighten.
Insert the Vertical Seat Post (10) into the Main
Frame (16) and line up the holes and secure in
place with the Adjustment Knob (7). The correct
height of the seat can be adjusted at a later stage.
Summary of Contents for X FIT 300
Page 9: ...9 10335 exploded drawing...
Page 22: ......