13
10389
ASSEMBLY STEPS
STEP 4: METER POST
Connect the Sensor Wire (75) to the Extension Wire
(20). Remove two Ø8 x Ø16 x 1.5 Flat Washers (17) and
two M8 x 30 Hexagon Bolts (23) from the Main Frame
(1). Attach the Meter Post (2) onto the Main Frame (1)
with two Ø 8 x Ø 16 x 1.5 Flat Washers (17) and two
M8 x 30 Hexagon Bolts (23) that were removed.
Tighten with the Allen Key provided.
Connect the Extension Wire (20) to the wire that
comes from the Computer (19).
Remove two M5 x 10 Cross Pan Head Screws (22)
from the Computer (19).
Then attach the Computer (19) onto the top end of
Meter Post (2) and use two M5 x 10 Cross Pan Head
Screws (22).Tighten the screws with the Spanner and
Phillips Screwdriver provided.
STEP 4
Spanner & Phillips
Screwdriver
S13, S14, S15
Allen Key S6
TOOLS:
Summary of Contents for X-Trainer Air Bike
Page 9: ...9 10389 EXPLODEDDRAWING...