10
www.trolla
.
dk
Always keep the product on a dry spot, when the product is not used and remember to oil once in a while
when the product is not used.
How to use:
1.
Planer is towed behind the ATV using the towbar coupling (50 mm) in the front.
REMEMBER to assure that the towbar coupling is locked correctly before starting!
2.
Lifting/lowering: When transporting the ATV Road Planer the spindles need to be lifted, so only
the wheels of the ATV Road Planer are touching the ground.
When the ATV Road Planer needs to be used the spindles are lowered again, so the ATV Road
Planer is again touching the ground. Depending on the terrain the spindles are adjusted to the
wished need of planing. It is a good idea to remove smaller layers over several rounds and NOT
REMOVE too much at once.
IMPORTANT: THE AREA HAS TO BE CLEARED AWAY OF PEOPLE, ANIMALS AND OBJECTS
!
On the left side of the ATV Road Planer there will be a line of surplus of materials. Keep that in
mind when using the product to get the best result efficiently.
ATTENTION: When adjusting the spindles be assured not to have your feet, or any other limbs
under the ATV Road Planer!
