USER MANUAL TXB30LS, V19.01
page
|
16
Technical changes, misprints and errors are reserved
7.3. Operation
7.3.1. Preparations
I.
Read and understand this user manual before you start to work with it.
II.
Fully lower the lift.
III.
Slowly position the vehicle midway between the platforms and apply the
parking brake.
IV.
Position the lifting pads under the vehicle manufacturer´s recommended
lifting points.
V.
Check the 4 lifting pads for their correct position.
VI.
Leave the vehicle and make sure the lifting area is clear.
7.3.2. Raising
I.
Lift the vehicle, using the vehicle manufacturer´s recommended lifting
points, only!
II.
The vehicle shall always be positioned in the middle of the lift.
III.
Briefly raise the lift, until the lifting pads contact the vehicle and make sure
that the pads are in the right position and the vehicle can be raised safely.
IV.
Raise the lift, using the „UP“ button, until the desired lifting height is
reached.
V.
Press the „LOCK“ button.
VI.
Turn the main switch to position „0“.
VII.
After all safety precautions have been taken, you can begin to working on
the vehicle.
7.3.3. Vehicle in raised position
I.
Observe all accident prevention regulations.
II.
Do not allow unauthorized personnel to stay under the raised vehicle.
III.
Avoid sudden movements on the vehicle.
IV.
Always keep the lift free of tools and parts!
V.
Fasten the vehicle to the support frame using lashing straps when
removing or installing heavy components. (center-of-gravity displacement)
