Models: 02-1040C0111 & 02A1040C0111
10 Ton (8.93 Metric Ton) Single Stage Jack
12/2020 | Rev. 02
Page | 7
6.4.2
Jack Instructions
(continued)
3. Close pump release valve by turning clockwise.
NOTE: Turning the pump release valve counter-clockwise lowers the jack. Turning the pump release valve clockwise
stops the jacks descent, and allows it to be raised.
4. Operate the pump using the handle, or by opening the air valve (if equipped with an air pump).
5. Lower ram locknuts as aircraft is raised.
WARNING!
•
The ram locknuts are user operated safety devices. Failure to utilize these locknuts may result in
personal injury or death.
•
Do not place hands on top of jack near ram locknuts while lowering jack. Pinch points exist between
top of jack and threads on ram.
•
Always wear safety glasses.
To Lower Aircraft:
1. Lower all jacks simultaneously.
2. If ram locking nut(s) is tight, raise jack slightly to release nut(s).
3. Loosen pump release valve slightly to slowly lower aircraft. Raise locking nut(s) as jack ram(s) lower.
NOTE: When using jack during washing operations, completely cover top of jack near ram seal.
7.0
PACKAGING AND STORAGE
7.1
PACKAGING REQUIREMENTS
Jacks are to be packaged as required to prevent damage to legs or hydraulic equipment during shipment.
7.2
HANDLING
Jacks can be rolled by hand on its casters.
7.3
STRAPPING
Jacks can be strapped down by suitable means to prevent unwanted movement during shipment.
7.4
PACKAGING PROTECTION
No special packaging material for cushioning or suspension is required.
7.5
LABELING OF PACKAGING
Packaging should be labeled
DO NOT DROP
.
7.6
STORAGE COMPATIBILITY
No special considerations.
7.7
STORAGE ENVIRONMENT
•
Store jacks between -20
C and +50
C/-4
F and 122
F.
•
Always store jack with ram all the way down.
•
Suitable for outdoor storage by using a full coverage waterproof tarp or canvas.
7.8
STORAGE SPACE AND HANDLING FACILITIES
•
Minimum Closed Height ........... 40 in (101.6 cm)
•
Mechanical Extension .............. 14 in (35.56 cm)
•
Hydraulic Extension ................. 24 ¼ in (61.6 cm)
•
Maximum Height Obtainable .... 78 ¼ in (198.75 cm)
•
Weight ...................................... 220 lbs (99.79 kg)
8.0
TRANSPORTATION
Lifting can be accomplished by crane and strap through top of tripod, or by fork truck under lower tripod support. Approximate
weight is 220 lbs (99.79 kg).
Summary of Contents for 02-1040C0111
