17
Setting The Automatic Drying Function
Factory Settings: On
•
Press and hold the Settings button [ ] and then press the Dry
button [ ] to turn on/off the automatic drying function.
•
When the function is deactivated, you will hear a short beep.
•
When the function is activated, you will hear a long beep.
User Presets
•
Press the User button [ ] to change to a different user’s
personal mode one by one. The selected settings of the User
mode will be used automatically. The functions performed at
this time are all according to the corresponding parameter
settings.
•
In User mode, user’s adjustment about water flow,
temperature, and position will be automatically saved for later
memory.
•
The remote will exit the user preset after entering standby state
for some while.
GETTING TO KNOW YOUR BOWL
Night Light
•
Press the Night Light button [ ] to turn on/ the night light.
You will notice the indicator level light up momentarily a short
beep when the night light is turned on or off .
Water Replacement
•
Press the Water Replacement button [ ] to start this function.
It will stop automatically after it is completed.
R
Note: Please use this function when you have not
used the toilet for a long time. This will replace the
water that has been sitting in the hoses. It is normal
that water drains from the wand area when the
function is activated.
