GB/IE/NI 18
3) The different modes of the Qi status indicator are
summarized below:
Qi wireless
charging status
Qi status indicator
9
Starting process (boot
phase), standby or searching
for a Qi charging device
Lights blue
Charging
Flashes blue
Fully charged
Lights blue
Fault/Error condition
Indicator off
No Qi compatible device
detected
Lights blue
P
Charging mobile devices with the
power bank via the USB output ports
You can charge up to two devices at the same time using the
USB ports of the power bank. If all outputs are used at the
same time, the sum of the output current must not exceed 3.0 A.
To charge your USB device with the Type C port, connect
the USB type A plug of the USB cable
6
or the original
charging cable of the device to be charged to the USB
Type A output
2
. Then connect the USB Type C plug
of the USB cable
6
to the Type C input of device to be
charged. The charging process will start automatically.
When a fast-charging device is charged at the Type A port,
the fourth LED of the battery capacitor indicator lights up
green.
Summary of Contents for 388710 2101
Page 3: ...3 4 5 6 7 8 2 1 9...
