GB
│
IE
│
NI
│
17
■
TLA 18 A1
♦
Insert the car charger adapter into the
12/24 V connection of your car . This
is usually the vehicle socket (cigarette
lighter) on the dashboard of your vehicle .
Many vehicles have a second socket
by the rear seats or in the boot . 24 volt
batteries are often used in lorries or on
boats .
♦
The operating LED
2
lights up white to
signal that the in-car charger is being
supplied with power . The operating LED
2
also lights up if no device is
connected . Depending on the vehicle
type, it is possible that the ignition has
to be switched on first .
♦
Connect your device to the car charger
adapter . Use the original USB cable
supplied with your device to optimise
the charging process .
♦
If required, you can switch your connected
device on for further use .
IB_398132_TLA18A1_LB6.indb 17
IB_398132_TLA18A1_LB6.indb 17
29.12.2021 16:18:38
29.12.2021 16:18:38