background image

CHAPTER 3 – Protecting & Maintaining The PMG Quadpad 

23 

 

Caring for the AC Adapter 

  Be sure to only use the AC adapter that comes provided with this product 

or a compatible option from the manufacturer. Other adapters may cause 

damage to the PMG Quadpad and will not be covered under the warranty. 

  Grasp the adapter plug and not the cord, when unplugging the adapter 

from an electrical outlet. 

  If the power cord becomes damaged (exposed or frayed, etc.), replace with 

a new AC adapter. Using a damaged cord may cause an electrical shock 

and may result in fire. 

  Power off and unplug the AC adapter from the PMG Quadpad before 

unplugging it from the electrical outlet. 

 

Caring for the Touch Screen Display  

  Never spray liquids of any kind directly onto the display screen or allow 

excess liquid to drip into the device. 

  Never place anything on the display screen that could cause damage to the 

LCD display, for example, drinks and food. 

  Never scratch the surface of the LCD display with any sharp or damaging 

objects. 

  Avoid exposing the PMG Quadpad to direct sunlight or excessive 

ultraviolet radiation for an extended period of time. 

  To clean the exterior of the device, wipe the screen and the housing with a 

soft, damp cloth moistened with water. Never use soap or other cleaning 

products on the LCD screen. It may discolor the outer coating and damage 

screen visibility. 

 

 

Summary of Contents for PMG Quadpad










































































Reviews: