Tronic TSW 300 A1 Operating Instructions Manual Download

Page: 4 / 72

- 2 -

POWER INVERTER

Intended Use

The device is intended for connection to a 12 V
vehicle power socket or a car battery and an output
of 220 - 240 V AC, for the connection of electrical
devices with Euro plug and a power consumption
of up to 300 Watts. In addition, battery-powered
devices with a USB interface e.g. MP3 Players, can
be charged from the USB port.
The device is not intended for commercial or
industrial purposes.
No guarantee claims will be granted for damage
resulting from improper use!

Attention!

Sensitive electronic devices should not be ope-
rated with the power inverter since the output
voltage is not sufficiently constant for these
devices.

Safety information

• This device is not intended for use by individuals

(including children) with restricted physical, physio-
logical or intellectual abilities or deficiences in
experience and/or knowledge unless they are
supervised by a person responsible for their safety
or receive from this person instruction in how the
device is to be used. Children should be supervised
to ensure that they do not play with the device.

• To avoid dangers remove the power inverter from

the vehicle receptacle and/or the connection ter-
minals from the automotive battery after each
use and before every cleaning.

• Only connect the power inverter to the automotive

battery when the engine is switched off! The
possibility of injury exists from rotating parts!

• Check the device and all parts for visible damage.

The safety concept of the device can only function
properly when it is in perfect condition.

• The power inverter must always be easily accessible

so that, in case of emergency, it can be quickly
disconnected from the power supply system.

Risk of electrical shocks.

• Connect the power inverter only to a 12 V auto-

motive battery/vehicle receptacle. Connecting
the device to a 24 V supply could damage it.

• When connecting the power inverter via the 12 V

vehicle plug make sure that the polarity of the
vehicle plug matches the polarity of the in vehicle
receptacle. The vehicle socket must have an inter-
nal positive pole, that is to say that the positive pole
of a vehicle battery cannot be connected to the
chassis of the vehicle.

• Check before connecting the power inverter that

the vehicle receptacle is sufficiently secured. This
safeguard may not in any way be circumvented
or changed.

• Use the supplied connecting cable only.
• Arrange for defective plugs, connection terminals or

cable to be replaced at once by qualified techni-
cians or our Customer Service Department.

• Get customer service to repair or replace connecting

cables and/or devices that are not functioning
properly or have been damaged.

• You may not open the casing or repair the device

yourself. Should you do so, the safety of the
device may be compromised and the warranty
becomes void.

• NEVER submerse the device in water.

Wipe it only with a slightly damp cloth.

This device suitable only for use indoors.

IB_71660_TSW300A1_GB_LB4.qxd 21.11.2011 16:24 Uhr Seite 2