5. Pairing
Warning: This operation may disconnect the original paired connection, please operate with
cautions.
1). Plug in the USB dongle receiver, keep the distance between the remote control and the pc
within 1m.
2). Press the “Mouse Left Key” and “Mouse Right Key” keys for 3 seconds, then the green
indicator starts blinking quickly and then leave your hands from the keys.
3). When the green indicator stops blinking and turns on, pairing succeeds.
6. Hibernation
The remote controller will turn into hibernation mode when it stays still for 20 seconds. Press any
key to wake up the remote controller.
7. Notice
1. Battery: Keep the battery with enough power. When the voltage is low, the stability of mouse
cursor will be affected.
2. Working Distance: The actual working distance of this remote controller will be affected by
electromagnetic field. Please make sure the receiver has not been covered by metal items.
3. Pairing: The pairing has been finished before the remote control leaves the factory. This
function can only be used by distributors.
4. Mouse Sensitivity Adjustment: Please change new battery first. If the mouse cursor is still
unstable, then you can use this function.
5. Indicator: There are 1 double color indicator on the remote controller, that is, the green
indicator and the red indicator.
Green Indicator: When the remote controller is well connected, the green indicator will keep
turning on; once the green indicator starts blinking, it shows that the remote controller is not well
connected, please check whether the receiver is well connected to the host or not, or the
