The Trooper
CF Card Reader
Installation and User’s Guide
10
COPYING
The user can save either individual images or video sequences to the CF
Card. To save a single image, review the video until the desired image is
seen. Press the ‘PAUSE’ button on the DVR to freeze the image. Use the
‘JOG’ wheel to move backwards and forwards through the images until the
desired image is viewed. Press the ‘COPY’ button to save the image to the
CF Card. After the image has been successfully saved, the word Success’ will
be displayed.
To save video sequences (and audio) to the CF Card, use the Search and
Playback functions to identify the start time and end time of the video to be
saved. Press the ‘STOP’ button and then press the ‘COPY’ button. The
following screen will be displayed:
Use the ‘UP’ and ‘DOWN’,
‘LEFT’ and ‘RIGHT’ arrow
buttons to set the start and end
times.
Press the ‘ENTER’ button to
begin copying the video to the
CF Card.
Note: To copy video, there must be information recorded at the start time and
end times. If there is no video, a ‘START time not found’ error will be
displayed. Use the Playback and Search functions to confirm the start and
end times.
When copying, the screen will show the progress by indicating the image
number that is being saved, as well as the status of the CF Card capacity.
When finished, the following screen will be displayed:
Backup Images to CF Card
START MM/DD/YYYY HH:MM:SS
05 11 2004 16 42 23
END
MM/DD/YYYY HH:MM:SS
05 11 2004 16 44 15
Press ENTER to start copy
Backup Images to CF Card
START MM/DD/YYYY HH:MM:SS
05 11 2004 16 42 23
END
MM/DD/YYYY HH:MM:SS
05 11 2004 16 44 15
COPY .... #1130 Complete
CF USED: 14.5%
SEGMENT: 4
Press MENU to exit
