The Trooper
CF Card Reader
Installation and User’s Guide
2
Installing the CF Card Reader
The TR-CFR CF Card Reader
supplied by
Seon Design
interfaces to a PC
using the Universal Serial Bus (USB) interface. A USB connector on the end of
the CF Card Reader plugs into a mating USB connector on the PC. A USB
extension cord is also provided to make the CF Card Reader easier to access.
WINDOWS
®
98 INSTALLATION
In PC’s using the Microsoft Windows
®
98 operating system, the computer
may not recognize the CF Card Reader when it is installed. Accompanying
the CF Card Reader is a CD containing device drivers for Windows
®
98.
Insert the CD into the computer’s CD-ROM drive. Use Windows Explorer to
view the contents of the CD-ROM drive. Double-click on the file ‘setup.exe’ in
the CD-ROM folder called ‘Card Reader’; the drivers will install automatically.
When complete, a window will pop up that says “The USB Storage driver has
been installed completely!’. Press the ‘OK’ button to finish.
WINDOWS
®
2000/XP INSTALLATION
For Windows
®
2000 and Windows
®
XP, the CF Card Reader is automatically
recognized as a ‘Mass Storage Device’. On a network system, the automatic
installation of the CF Card Reader may require Administrator Privileges.
Please contact your Network Administrator for this type of installation.
USB Connector
CF Card Slot
