background image

9

Operating Precautions

BATTERY USE AND CARE

Recharge only with the charger specified by the manufacturer. A 

charger that is suitable for one type of battery pack may create a 

risk of fire when used with another battery pack.

Use power tools only with specifically designated battery packs. 

Use of any other battery packs may create a risk of injury and fire.

When battery pack is not in use, keep it away from other metal 

objects, like paper clips, coins, keys, nails, screws or other small 

metal objects, that can make a connection from one terminal to 

another. Shorting the battery terminals together may cause burns 

or a fire.

Under certain conditions, liquid may be ejected from the battery; 

avoid contact. If contact accidentally occurs, flush with water. 

If liquid contacts eyes, additionally seek medical help. Liquid 

ejected from the battery may cause irritation or burns.

Always remove the battery when the Ice Auger is not in use, or 

before maintenance or to free the blade when stuck.

The Ice Auger has a sharp blade that can cause injury

or damage to property. Always use the blade protector

when the tool is not in use.

This tool is for drilling into ice. Do not use it for any other purpose 

or with accessories not supplied by Trophy Strike. Never attempt to 

modify the tool, or to bypass any of the safety features.

DO NOT USE A DAMAGED BATTERY.

 If the battery case is cracked 

or shows other signs of damage, it should be replaced. Batteries 

and chargers should be recycled or disposed of properly. Do not 

disassemble the battery or dispose of in fire. 

Avoid using in adverse weather conditions where the powerhead is 

exposed to moisture.

!

WARNING

!

CAUTION

Summary of Contents for 107387

















Reviews: