8
EN
pedestal fan TVE 24 S
Start-up
When positioning the device, observe the minimum distance
from walls or other objects as described in the chapter
Technical annex.
A
B
D
C
C
Warning
Risk of injury due to incorrect start-up!
There is a risk of injury if the protective grid is not
installed correctly around the impeller. The protective
grid must be installed correctly before the device is
switched on.
Warning
Risk of injury if protective grid is removed!
There is a risk of injury if the protective grid is removed
during operation. Do not remove the protective grid
while the device is in operation!
•
Before restarting the device, check the condition of the
power cable. If there are doubts as to the sound condition,
contact the customer service.
•
Only put up the device in an upright, stable position on firm
ground.
•
Do not create tripping hazards when laying the power
cable or other electric cables, especially when positioning
the device in the middle of the room. Use cable bridges.
•
Make sure that extension cables are completely unrolled.
•
Make sure that no curtains or other objects interfere with
the air flow.
Inserting batteries into the remote control
Warning of electrical voltage
Do not touch the battery compartment with wet or
damp hands.
Note
Do not use rechargeable batteries!
Observe the Technical data for start-up.
1. Press the locking at the side of the battery compartment
together and pull the battery compartment out of the
remote control.
2. Insert three type AAA batteries into the battery
compartment and slide the battery compartment back into
the remote control.
Connecting the power cable
•
Insert the mains plug into a properly fused mains socket.
