EN
11
dehumidifier TTP 5 E / TTP 10 E
2. Clean the filter using a slightly damp, soft, lint-free cloth. If
the filter is heavily contaminated, clean it with warm water
mixed with a neutral cleaning agent.
3. Allow the filter to dry completely. Do not insert a wet filter
into the device!
4. Reinsert the air filter into the device.
TTP 10 E
Emptying the condensation tank
If the condensation tank is full, the indicator LED (10) lights up
orange. The device switches off.
1. Take the condensation tank out of the device.
11
2. Remove the rubber stopper (11) from the condensation
tank.
3. Empty the condensation tank over a drain or sink.
4. Put the rubber stopper (11) back in.
5. Rinse the tank with clear water. Clean the tank regularly
using a mild cleaning agent (no detergent!).
