background image

EN

15

Ozone generator Airozon® 28 ECO

Disposal

The icon with the crossed-out waste bin on waste

electrical or electronic equipment stipulates that this equipment
must not be disposed of with the household waste at the end of
its life. You will find collection points for free return of waste
electrical and electronic equipment in your vicinity. The
addresses can be obtained from your municipality or local
administration. You can also find out about other return options
that apply for many EU countries on the website 
https://hub.trotec.com/?id=45090. Otherwise, please contact an
official recycling centre for electronic and electrical equipment
authorised for your country.
The separate collection of waste electrical and electronic
equipment aims to enable the re-use, recycling and other forms
of recovery of waste equipment as well as to prevent negative
effects for the environment and human health caused by the
disposal of hazardous substances potentially contained in the
equipment.

In the European Union, batteries and accumulators must not be
treated as domestic waste, but must be disposed of
professionally in accordance with Directive 2006/66/EC of the
European Parliament and of the Council of 6 September 2006
on batteries and accumulators. Please dispose of batteries and
accumulators according to the relevant legal requirements.

Declaration of conformity

The text below sets out the contents of the declaration of
conformity. The signed declaration of conformity can be found
at 

https://hub.trotec.com/?id=44535

.

Declaration of conformity

in accordance with the EC Machinery Directive 2006/42/EC, 

Annex II, Part 1, Section A

Herewith, we – Trotec GmbH– declare that the machinery
designated below was developed, constructed and produced in
compliance with the requirements of the EC Machinery
Directive in the version 2006/42/EC.

Product model / Product:

Airozon

®

 28 ECO

Product type:

Ozone generator

Year of manufacture as of:

2021

Relevant EU directives:

2011/65/EU: 01/07/ 2011

2012/19/EU: 24/07/2012

2014/30/EU: 29/03/2014

2015/863/EU: 31/03/2015

Applied harmonised standards:

EN 55014-1:2017

EN 60335-2-65:2003

EN 60335-2-65:2003/A1:2008

EN 60335-2-65:2003/A11:2012

EN 62233:2008

Applied national standards and technical specifications:

EN 55014-2:2015

EN 61000-3-3:2013/A1:2019

EN 60335-1:2012/A1:2019

EN 60335-1:2012/A2:2019

EN 60335-1:2012/A14:2019

EN IEC 61000-3-2:2019

Manufacturer and name of the authorised representative of
the technical documentation:

Trotec GmbH
Grebbener Straße 7, D-52525 Heinsberg
Phone: +49 2452 962-400
E-mail: info@trotec.de

Place and date of issue:
Heinsberg, 

22.04.2020

Detlef von der Lieck, Managing Director

Summary of Contents for 1180000095

















Reviews: