8
EN
Cordless random orbital sander PESS 10-20V
Information about the device
Device description
The device
PESS 10-20V
is a cordless random orbital sander for
dry sanding that is suitable for sanding wooden surfaces,
plastic, metal, spackle and paints on larger surfaces.
For material-compatible working, the nominal oscillation rate
can be set for 6 steps within a range of 6,000 to 24,000 rpm at
the setting wheel. The device is equipped with an on / off switch
for continuous operation as well as an additional handle
adjustable in six positions to enable convenient and fatigue-free
working. The tool-free Velcro
®
system permits a simple
exchange of sanding sheets. A clean working environment can
be accomplished by use of the dust collector with integrated
filter and the reducer for external dust extraction.
The battery comes with its own battery level indication. As a
result you can check the current charging status without having
to connect it to the device.
Device depiction
1
17
2
16
14
3
13
15
4
5
12
6
11
10
8
7
9
No.
Designation
1
Device handle
2
Random orbital sanding plate
3
Wing nut
4
Quick charger
5
Red battery LED (battery charging)
6
Battery
7
Adapter for external dust extraction
8
Sanding sheet
9
Dust collector with filter
10
Battery level indication
11
Release button
12
Green battery LED (quick charger ready for operation)
13
Dust extraction connection
14
Battery holder
15
On/off switch
16
Additional handle
17
Setting wheel oscillation rate selection
