6
EN
air cleaner AirgoClean® 150 E
Operation
Note
Avoid open doors and windows.
Control panel
8
9
10
11
12
13
14
15
16
17
18
19
20
22
21
No.
Designation
Meaning
8
Light sensor
The light sensor detects when the
surroundings are dark.
The device additionally switches
to night mode if automatic mode
is selected.
9
Air quality LED
Is illuminated when the device is
switched on.
green = good
orange = medium
red = poor
10
Lock
LED
Is illuminated when the control
panel is disabled.
11
Filter
LED
Is illuminated if the prefilter with
integrated HEPA carbon filter has
to be cleaned.
12
ION
LED
Is illuminated when ionisation
mode is activated.
13
ION
button
Switching ionization on or off
Press the
ION
button (
13
) for more
than 3 seconds if the
filter
LED (
11
) lights up and the filter
has been replaced.
14
Sleep
LED
Is illuminated when night mode is
activated.
15
Sleep
button
For switching night mode on or off
16
Auto
LED
Is illuminated when automatic
mode is activated.
17
Auto
button
Switching the automatic mode on
or off:
No.
Designation
Meaning
18
Hours
LEDs
Indication of the number of hours
of the activated timer: 1 h, 2 h,
4 h or 8 h
19
Timer
button
Switching on the timer function:
1 h, 2 h, 4 h, 8 h
20
Speed
LED
Indication of the selected fan
speed:
Stage 1 = low
Stage 2 = mid
Stage 3 = high
Stage 4 = turbo
21
Speed
button
Setting the fan speed in 4 stages:
22
On/Off
button
Switching the device on and off
Switching the device on
Once you have completely installed the device as described in
the Start-up chapter, you can switch it on. When the power
cable has been connected, the control panel lights up for
2 seconds and an acoustic signal is emitted. Afterwards, the
air
quality
LED (
9
) is illuminated in red. The device is now in
standby mode.
Please proceed as follows to switch the device on:
1. Press the
on/off
button (
22
).
ð
The
speed
LED (
20
) of fan stage 1 is illuminated.
ð
The
air quality
LED (
9
) lights up accordingly to the air
quality.
Setting the operating mode
The device comes with the following operating modes:
•
Automatic mode
•
Night mode
•
Ventilation
Automatic mode
When in automatic mode, the device automatically detects the
air quality.
Please proceed as follows to set the automatic mode:
ü
The device is switched on.
1. Press the
auto
button (
17
) to activate the automatic mode.
ð
The
auto
LED (
16
) is illuminated.
ð
The
speed
LED (
20
) of fan stage 1 is illuminated.
After the device has been measuring the air quality, the
air
quality
LED (
9
) will be illuminated in the respective colour:
green, orange or red.
The fan speed will be changed depending on the air quality.
