5
EN
Operating manual – air washer AW 10 S
Operation
Operating elements
SCS
12
9
10
11
13
14
15
16
17
18
No.
Designation
9
Power button
10
SecoSan
®
Stick indication
11
Water tank indication
12
Fan speed indication
13
Night mode indication
14
Operating mode button
15
Humidity level indication
airwasher zone = comfort zone between 40 % and 60 %.
The indicator shows the current room humidity level up to 60 %
even if the device switches off at 50 %.
16
Automatic/continuous operation indication
17
Plasma generator indication
18
Reset button for SecoSan
®
Stick
Switching the device on
ü
The water tank is filled with fresh drinking water.
ü
The power cable is connected to a sufficiently fused mains
socket.
1. Press the power button (9).
ð
The device switches on.
Setting the operating mode
The following table shows an overview of the operating modes:
Operating
mode
Description
Display
Auto
Fan speed control depending on room
humidity.
When reaching a humidity level of 50 %, the
device stops. It continues to operate as soon
as the measured humidity level falls below
50 %.
Auto
Night mode
The device runs in night mode. The LED
illumination of the control panel is dimmed.
The fan runs at the lowest speed.
When reaching a humidity level of 50 %, the
device stops. It continues to operate as soon
as the measured humidity level falls below
50 %.
Fan max
The fan runs at the highest speed, regardless
of the room humidity.
Fan med
The fan runs at medium speed, regardless of
the room humidity.
Fan min
The fan runs at the lowest speed, regardless
of the room humidity.
1. Press the Operating mode button (14) until the desired
operating mode is set.
ð
The corresponding display is illuminated.
